Use the scroll bar to navigate through the topics below.

Airframe

C-T-S.com has written and produced a wide selection of technical and detailed training modules, which incorporate and maintain high quality graphics and interactive animations throughout. The main aim with all our e-learning media is to make our training more engaging and informative, therefore, enhancing our training applications for students and to make the lessons more rewarding. This enables a more demonstrative and creative lesson which is designed to feel more of a one to one.

Our Airframe modules highlight main topics such as:

• Theory of Flight
• Structures & Structural Loads
• General Concepts
• Airworthiness Requirements for Structural Strength
• Structural Classification
• Fail Safe, Safe Life and Damage Tolerance Concepts
• System Installation Provisions
• Aircraft Bonding
• Construction Methods
• General Concepts
• Flight Controls
• Instrument Systems
• Fundamentals
• Pressure Measuring Devices and Systems
• Pitot Static Instruments
• Altitude Reporting / Alerting Systems
• Air Data Computers
• Temperature and Fuel Quantity Indicating System
• Gyroscopic Instruments
• Ground Proximity Warning Systems
• Compass Systems
• Flight Data Recording Systems
• Electronic Flight Instrument Systems
• Central Warning Systems
• Angle of Attack Indicating and Stall Warning Systems
• Vibration Measurement and Indication
• Lights
• On-Board Maintenance Systems

Ammunition

This program describes and explains the different types of small arms ammunition in service. C-T-S.com has incorporated dynamic 2D and 3D graphics which demonstrates and shows in detail how to identify each type by markings. It also describes and explains all of the component parts.

The final part of the lesson includes servicing the ammunition bins. Using a step by step sequence, the student is guided through the servicing procedure. It identifies the cleaning tools required and shows how to strip clean and service the weapons.

C-T-S.com has produced additional training modules within this program, which includes:

• Ammunition Storage
• Ammunition Disposal
• Handling 120mm Ammunition

Artillery Weapons

C-T-S.com has produced specific programs describing the purpose, function and operation for a variety of Artillery Weapons.

The e-learning multimedia subjects include:

• Trip Action
• Electric Type Firing Mechanism
• Artillery Canon System
• Breech Mechanism
• Loader and Rammer
• Gun Tubes
• Firing Mechanism

It also covers the component parts of the three types of Firing Mechanism:

• Auto Cocking
• Trip Action
• Electric Type

The course identifies the basic structure and superstructure of the FH2000 155mm Field Howitzer, M71S 155mm and 105mm Light Gun.

It describes custom-made topics such as the preparation of the FH2000 155mm vehicle, highlighting and identifying the purpose, function and operation of the FH2000 155mm Trail Legs, Firing Platform and Traversing, Elevating Mechanism and Sighting Instrument. The program also includes the operation and the typical maintenance procedures of the Horizontal Sliding Breech Mechanism in the Cocking and Semi Automatic operating modes.

The module explains the purpose and function of the Gun Tube and describes the construction of a Gun Tube, the purpose of Rifling, the working principle and maintenance of the Muzzle Brake, Fume Extractor and identifies the cause of Barrel and Bore defects.

Avionics

C-T-S.com has produced e-learning media that introduces and outlines the main concept of Avionics. The training programs include:

• The purpose of the Avionics Forced Air Cooling Systems
• Identifying the components of the Avionics Forced Air Cooling Systems and their location
• The principles of the Ground Cart mode of operation
• The principles of the engine/APU Ground Cart mode of operation
• The principles of Taxi, Take Off and climb modes of operation
• The principles of Pressurized and Unpressurized Flight

This course explains how the engines are started by a pneumatic system which uses compressed air supplied from the Auxiliary Power Unit, a ground power unit, or the other running engine. The module explains the different methods of cranking the engine and shows the controls used and displays indicating a fault.

C17 GLOBEMASTER

C-T-S.com has delivered a variety of training programs on the C17. Modules are fully interactive where the student is required to attempt a number of questions on the subject.

Feedback is given after each answer. Questions include types of clamp functions, fitting, inspection and maintenance.

The aim of the e-learning media is to provide students with the underpinning knowledge and where possible the skills required to progress onto further training using PTT’s, simulators and operational equipment. To successfully achieve this requirement C-T-S.com has converted all the Training Objectives into a high quality and dynamic learning systems.

Additional subjects also include:

• Ice and Rain Protection
• Fuel System
• Indicating and Recording
• Power Plant Electrical Indications

Chinook

C-T-S.com has developed a number of alternative modules for the Chinook for the RAF.

Some of the course subjects include:

Fuel System

This module explains the purpose of the fuel system. With the help of digital images and schematics it shows the location of the major components describes their function using animation, and briefly explains their operation.

APU System

This course explains the function of the APU. With the help of digital images and schematics, it describes the main parts of the APU, theory of air flow, APU fuel and oil systems, together with how to diagnose faults and corrective and preventative maintenance procedures.

The RAF operates the largest fleet of Chinook Support Helicopters after the US Army, with a total of 34 HC2s, 6 HC2As and 8 HC3s (the HC3 has yet to enter operational service). The Chinook Wing, which forms the heavy-lift element of the Joint Helicopter Command (JHC), is based at RAF Odiham in Hampshire. Odiham supports three operational squadrons, No. 7 Squadron, No. 18 Squadron and No. 27 Squadron, and the Operational Conversion Flight.

The HC2 and HC2A aircraft are used primarily for trooping and for carrying internal and/or underslung loads and can carry up to 55 troops or 10 tonnes of freight. The cabin is large enough to accommodate two Land Rovers, while the three underslung load hooks allow a huge flexibility in the type and number of loads that can be carried externally. Secondary roles include search and rescue and casualty evacuation, in which role a total of 24 stretchers can be carried.

Electrics

C-T-S.com has developed and installed more than 36 Electrics programs. This module, which is for Mechanics and Technicians alike, includes 63 subjects.

The instructor has the ability to select all or part of the lessons from an easy to use Graphical User Interface (GUI). All the e-learning media has Security and Student audit facilities, to ensure that total accountability and control are afforded.

The training module describes the components and locations and explains the function of the DC Remote Position Indicating System including the procedures for diagnosing and rectifying faults.

The program also allows students to train in the skills of electrical fault finding. Using an emulator based on a bomb release system. This multimedia training course incorporates over 150 electrical faults typical of the real equipment.

Students can practice recognizing typical symptoms, fault diagnostics and the techniques required to rectify the problem. From removing fuses to using test equipment this program captures all the procedures required to carryout electrical fault finding on the real equipment at a fraction of the cost, in safe working conditions with complete student accountability being recorded on the computer.

Harrier

C-T-S.com has produced a number of multimedia programs for the Harrier aircraft covering the Fuel System, Hydraulic Systems, Landing Gear and Airbrakes. We have also produced an exact ’Life Size’ replica, which is a complete fully operational Emulator of the main Harrier Cockpit Controls and Flight Instruments and Gauges.

A first in a series of 8 lessons covering the Harrier GR7 and T10 Fuel System. The module starts by describing the layout of the complete fuel system. It shows the location and describes each tank part. Using animated schematics, 2D graphics and digital photographs supported by text, it describes and explains the flow of fuel throughout the system, including the main components, their functions and basic operation. It also explains the fuel flow through the various valves and safety devices within the system.

This training module also includes Procedure Training which covers the following subjects:

• Tank Layout
• Ground Refuel
• In Flight Refuel
• System Operation
• De Fuel
• Starting Fuel
• T10 Supplement
• Air Brakes
• Nose Wheel Steering
• ECS General Introduction
• ECS Pressurization & Cooling
• ECS Throttle & Nozzle Control
• Engine Start System

Lockheed Tristar

C-T-S.com is a long term training solution partner, having worked closely on a variety of ongoing and complex training modules for over 20 years. In this time, we have written, designed, produced and delivered numerous technical training modules, all of which include high quality graphics and detailed interactive 3D animations. Our training modules explain and demonstrate subjects such as:

• Comprehensive Avionics Suite
• Aircraft Operations
• JTIDS (Joint Tactical Information Distribution System)
• Hosedrum Refueling Units
• Radio Relay
• Directional Infrared Counter Measures
• Cockpit
• Air-to-Air Refueling
• Hose-and-Drogue Configuration
• CCTV System

These aircraft are used extensively for transporting troops and tankers to world-wide destinations in support of exercises and operations.

MX-15

C-T-S.com has designed and produced e-learning and simulation on the MX-15 Electro-Optical and Infrared (EO/IR) Camera Imaging Turrets.

The MX-15 simulation provides multiscreen 3D databases for land, sea, desert and arctic environments. The view interacts with simulations of the real equipment and visual databases in various training scenarios.

The e-learning content covers subjects on:

• Camera System Location and Identification
• Purpose of the WESCAM MX-15 System
• Tasks and missions
• Maintenance requirement of the WESCAM MX-15 System
• Locate and Identify all the components and LRU’s of the WESCAM MX-15 System
• Operation of the WESCAM MX-15 Turret Steering, Stabilization and Environment control functions
• Description of the WESCAM MX-15 Imaging Sensors
• Principles of Infrared
• Characteristics of Materials and MX 15 Camera System Maintenance
• The need for Flight Servicing of the WESCAM MX-15 System
• The necessity for Power ON and Built In Testing (BIT) on the WESCAM MX-15 System MX 15 Camera Emulator

The purpose of this module is to provide a facility to enable the user to practice operator procedures in real time. Using a combination of digital photographs, animated schematics and 3D graphics supported by text it describes the complete WESCAM MX-15 Camera System.

Propulsion

C-T-S.com has produced and developed various programs on Propulsion Systems. The e-learning media is Instructor led. It comprises 2D and 3D graphics, animations and text to explain and demonstrate the individual components and integrated system, providing both the air and ground crew with an understanding of the system operation, which is readily transferable to the workplace. It consists of 6 lessons, covering areas such as:

• Electrical System
• Engine Theory
• APU Systems
• SPSCU and associated APU wiring
• APU Faults
• Thrust Reverse

C-T-S.com has also developed additional modules for Propulsion, including:

• Stating the purpose and function of the Integrated Drive Generator (IDG)
• Identifying the location of the major components of the Integrated Drive Generator (IDG)
• Explaining the operation of the Integrated Drive Generator, Frequency and Load Control Unit (FLCU)
• Electrical Control Panel
• Frequency Reference Unit (FRU)
• Generator Circuit Breaker (GCB)
• Bus Power Control Unit (BPCU)
• IDG Busbar Maintenance Annunciator Panel (MAP)
• IDG Oil Coolers
• IDG Hot Bus Warning Lights
• Generator Control Lights

Sabre

Using a combination of 2D and 3D graphics this module describes the various types of fire fighting equipment used on the Combat Vehicle Reconnaissance Tracked (CVR (T)) Sabre vehicle. It shows the locations within the vehicle and explains the running checks to be carried out.

With aid of 2D graphics and digital photographs this training module describes and explains the controls and components and how to use the Gunners sight. Using 2D and 3D animations, graphics, digital photographs and video, it shows the operation of both the day and night sighting equipment, in addition to the operational, safety, testing and servicing procedures.

Using a combination of digital photographs and video the student is shown how to adjust the sights using the Muzzle Boresight and a Distant Aiming Point. Every sequence is supported by voiceovers and text.

Scimitar

C-T-S.com has presented this particular module using 2D and 3D graphics. It describes the characteristics of the Multi Barrel Smoke Grenade Discharger and operation. In addition, it explains the operating, safety, testing and servicing procedures.

This is a two-part lesson on the Nuclear Biological and Chemical System. Incorporating 2D/3D graphics and animations supported by voiceovers and text, it identifies the location of the NBC System and describes all the components and controls including:

• Introduction to CVR (T)
• The Fire Order
• Corrections
• Moving Targets
• Machine Gun Shooting
• Commanders Fire Control
• Shooting At Night
• Range Estimation (RAC)
• Tactical Application of Fire
• Armament Documentation
• Range Organization and Firing Point Discipline
• Casualty Evacuation
• Multi Barrel Smoke Grenade Discharger (MBSGD)
• Nuclear, Biological and Chemical Air Filtration System
• 30mm RARDEN Gun – Introduction to Handling
• 30mm RARDEN Gun – Stripping and Assembling
• 30mm RARDEN Gun – Recoil System Servicing
• General Description of Hull
• Introduction to E Spire Turret
• Fire Fighting Equipment
• L37 Additional Stripping and Assembling
• Commanders Sighting Equipment
• Gunners Sighting Equipment
• Commanders Control Unit (CCU)
• E Spire Start Up and Close Down
• Parameter Adjustments
• Sight Alignment
• E Spire Maintenance
• Servicing Armaments
• 30mm Gun Mechanism
• L37 7.62mm Mechanism
• 30mm Ammunition
• Hand Held Laser Range Finder (HHLRF)
• Spyglass and Associated Equipment
• Observers Thermal Imaging System (OTIS)

Sea King

C-T-S.com has produced fully comprehensive and technical training modules for the Westland Sea King, which includes very high quality and animated graphics which demonstrates a number of course subject matters, some of which include:

• Performance of the Aircraft, Capabilities and new modifications
• Automatic Flying Control Systems
• Hydraulics

The Sea King is designed as a Naval Helicopter and has numerous features which make it well suited to embarked operations; these include powered folding rotor blades, a folding tail, robust undercarriage, a telebrief system and construction from materials resistant to salt water corrosion. The aircraft is a stable platform for Instrument Flying and is fitted with a comprehensive suite of navigation aids including an Instrument Landing System, much the same as that found in civil airliners. The Sea King HC Mk 4 has clearance to fly in certain icing conditions and is fully Night Vision Goggle compatible.

It is an all weather, day and night amphibious medium support helicopter and is cleared for operations from nearly all HM and many foreign warships. It is equally at home providing support to ground forces when ashore. The aircraft can seat up to 27 troops and is fitted with an external cargo hook capable of carrying underslung loads weighing up to 6000lbs such as Land Rovers and Light Artillery.

Sentry AEW

C-T-S.com has produced, developed and installed interactive lessons for the Sentry AEW. This training module incorporates a simulator and provides complete functionality of the controls and displays, allowing the student to learn and practice operational procedures, including:

• The function of the Automatic Pilot
• Identifying the Dynamic Loop Demand Loop
• Identifying which Flight Controls are activated by the Servos
• The purpose and function of the components of the Automatic Pilot
• Recognizing the location of the components of the Automatic Pilot
• The Pre-engage and Engage conditions and identify the effects on the aircraft
• Identifying the components of the AP Engage Interlocks
• Avionics and Radio Suite to detect and deter anti-aircraft radar
• Talon Radio
• Electrical Power System Overview
• Cooling system Overview
• KY 100 & RCU
• HF CDU-900 Data Loader Access and Control Indicator Panel
• Havequick Control Unit
• Mission Digital Radio
• KG40 & Link 11
• Baseburner distribution Panel
• VHF-AM Mission Control Panel
• Draw Through Cooling
• Audio Distribution System
• Power Feeder Duct Cooling
• Forced Air Cooling System
• Antenna Pedestal ECS
• Auxiliary Unit
• Talon Radio Control Unit
• External Power
• TX Cooling
• Integrated Drive Generator (IDG)
• AC Distribution
• KYV-5
• KY-58
• Mission Audio Recorder
• Digital Display Indicator

Striker

C-T-S.com has worked very closely and in Partnership with various defense organizations for a number of years and has developed, implemented and installed a wide range of course specific applications for The British Army.

Striker is one of the family of the CVR (T) vehicles which includes Scimitar, Spartan, Sultan, Samson and Samaritan.

The training module forms the introduction to the CVR (T) Striker and identifies and describes the main components. The module is presented using 2D and 3D graphics and digital photographs, supported by voiceovers and text, to describe the various components. It describes the characteristics of the Multi Barrel Smoke Grenade Discharger and explains its functionality including safety, testing and servicing procedures.

Subjects included in this module are:

• Introduction to AFV
• Ammunition Recognition
• Fire Fighting Equipment
• Multi Barrel Smoke Grenade Discharger (MBSGD)
• Casualty Evacuation
• High Pressure Pure Air System (HIPPAS)
• Direct Sighting Equipment
• Direct Sight Displays
• Direct Fire Control Equipment
• Safe Test Sequence Direct
• On Board Trainer
• Launcher Bins
• Separated Sighting Equipment
• Separated Fire Control
• Safe Test Sequence Separated
• Vision Cupola
• Sight Unit Image Intensified II
• Nuclear, Biological and Chemical Pack
• Sight Servicing
• Weapon System Servicing
• Preparation for Firing
• Introduction to the L37 GPMG
• Additional Stripping and Assembling
• Ammunition Supply, Load, Fire and Unload
• Stoppages
• Missile Operation
• Introduction to Swingfire
• SWIG Direct Data
• Introduction to the SWIG Trainer
• SWIG Trainer Modes of Operation
• Command Break Up (CBU) and Range Procedures

Submarine Foundation Training

C-T-S.com has produced and designed a custom-made selection of comprehensive and highly detailed technical training modules. Specific projects include the Submarine Foundation Course. Quality graphics and interactive 2D and 3D animations have been added to provide engaging educational personal development training. The e-learning media demonstrates a wide range of applications covering in depth topics around the following subjects:

• Bilge System
• Hazards
• Propulsion System
• Weapons
• Safety on Board
• High Press Blow Systems
• Operating Hydraulic Mast
• Ventilation System
• Categories of Noise
• Air Vent Blow
• Pressurized Water Reactor
• Air Purification Systems
• Submerged Signal Ejector
• EBS
• Electrical Power Generator
• Sub Control Console
• Containment Areas

Super Lynx

Following on from the successful development of the Korean Super Lynx, C-T-S.com has been awarded a contract to produce training modules for the new Glass Cockpit Super Lynx for the Malaysian Navy Lynx Mk 100 and the Oman Navy Lynx Mk120 and the Brazilian Navy.

The module includes a total of 42 lessons covering subjects to the student such as introductions on the history, current deployment and roles of the Super Lynx Helicopter.

C-T-S.com has developed and installed 2D & 3D graphics which explains the characteristics, specification and capabilities of the aircraft. It includes an overview, introducing the twenty-eight modules that make up the suite ranging from Electrical Systems and Components, Fuel System Configuration through to Hydraulics, Transmission Systems and Maintenance Operations.

The course also deals with the general safety aspects and danger areas affecting the operation and maintenance of the Super Lynx. Using 2/3D graphics, animations and digital photographs supported by voiceovers and text it explains the hazards and precautions to be adopted.

T45

C-T-S.com has been commissioned to design Courseware for the new “D” Class T45 Destroyers.

The training material is been developed so that it can be further reused by applying a new theme (style), so the same course material can be delivered in different establishments, but with the look and feel tailored to the host training organization. It can be used for personalization of e-learning, further enhancements to the training’s custom-made feel, can be made by using versions of graphics/emulations specific to the individual; an example is that maintainers on later T45 platforms with different equipment states can be provided with the correct version of the equipment during training, allowing several maintainer in the same lesson to receive the correct modification state for the ship they are to join.

Further contracts have been awarded for C-T-S.com to provide IEP Simulator and NBCD Trainer e-learning. The electrical propulsion system simulator includes Propulsion Management System and local control panels to operate in steady state and reversionary modes, HV switchboard, LV switchboard, PWM converter, diesel generator, gas turbine, HV filter, LV filter, local control panels and ancillary equipment. Via instructor stations various scenarios and faults can be initiated allowing the training and assessment of students prior to operational deployment.

Tornado

C-T-S.com has developed a wide range of Tornado programs for the Tornado F3 Aircrew Training School, Tornado Maintenance School and the Tornado Tri National Operational Conversion Unit. These are highly innovative and interactive training solutions. They effectively combine high quality 2D and 3D graphics, video, text and audio, together with on-screen equipment emulations into a unique multi-media learning experience. To date, C-T-S.com has produced and delivered these training solutions to the MoD’s of the UK, Germany, Italy and Saudi Arabia, and is continuing to develop e-learning media under a Post Design Service contract.

The multimedia applications are used by both aircrew and ground crew and have been developed for delivery by an Instructor, Computer Aided Instruction (CAI), and for student self-paced learning and revision, Computer Aided Learning (CAL). Emulation enables all trades to operate systems, learn and practice operational procedures. Consisting of 27 lessons covering all of the aircraft systems, this program is supplemented with further lessons on specific equipment fits.

The lessons are based on the following subjects:-

• Airframes
• Propulsion
• Electrics
• Avionics
• Weapons

Turret Systems

This multimedia training course forms the introduction to the FV510 Warrior. It identifies and describes the main components including the Personnel and Vehicle Safety Precautions to be adopted.

It is first of a two part training module, which forms the introduction to the FV510 Warrior Turret, it identifies, describes and explains the function of the main components of the Commander, Gunner and Driver stations using and presented in 2D and 3D graphics which are also supported by voiceovers, digital photographs and text.

The module makes extensive and detailed use of video and 2D and 3D graphics, to show the internal views of the turret, components and Electrics. In order to operate as a team, each member of the crew must be familiar with the equipment, its location and how to operate it efficiently. The student is taught the components use and operation of the Elevation Traversing and Power Gears.

With aid of 2D graphics and digital photographs this lesson describes and explains the controls and components of the Raven Sight. Using 2D animations and video it shows the operation of both the day and night sights.

VC10

C-T-S.com has designed, produced and installed a range of fully functional and comprehensively detailed technical CBT modules for the VC10 aircraft, that include high quality graphics and interactive animations. Our training modules demonstrate various applications and subjects which include:

• Avionics of the Aircraft and Capabilities
• Aircraft Modifications and Maintenance procedures
• Probe and Drogue Re-fuelling System
• Flight-Management System
• Defense Systems - Radar-Warning Receiver
• Matador IRCM (Infrared Counter Measures) Missile-Protection System
• Infra-Red
• Principles of Flight

The VC10 aircraft is predominately used for carrying troops, with accommodation for 124 Passengers and 9 Crew. It has the use of a large cabin-freight door on the forward left side of the aircraft, which allows easy conversion of the aircraft into a dual-role passenger/freight or full-freight configuration. In its full-freight role, the cabin can hold up to 20,400kgs of palletised freight, ground equipment or vehicles, on its permanently strengthened floor.

The aircraft can also be used for aero-medical evacuation, for which up to 68 stretchers may be fitted. The crew normally comprises of two pilots, a weapon systems officer, a flight engineer, an air loadmaster and up to three air stewards. This aircraft is used almost exclusively to carry ground crew and other operational support personnel and is a significant asset to the RAF, enabling the rapid deployment of troops and their weaponry, and fast-jet fighter aircraft, to any theatre of operations around the world.

Warrior

C-T-S.com has developed e-learning media for the FV510 Warrior. It identifies and describes the main components including the Personnel and Vehicle Safety Precautions to be adopted.

The module also includes subjects such as Personnel and Vehicle Safety Precautions to be adopted when working with the vehicle. It also describes the main components of the Muzzle Boresight. In a step by step sequence, it explains the preparation procedure required, prior to carrying out sight alignment. It describes the characteristics of the Multi Barrel Smoke Grenade Discharger and its operation. In addition, it explains the operating, safety, testing and servicing procedures.

C-T-S.com has produced a Servicing Armaments three part CBT module, which forms the introduction to the 30mm RARDEN Gun and L94A1 Chain Gun. It explains the Normal Safety Precautions and Procedures to be adopted when operating the weapon and demonstrates how to service the armaments. It highlights the weapon drills for loading, firing and unloading. This is presented in 2D and 3D graphics, digital photographs and supported by audio and text. The student is taken step by step through the servicing procedure, identifying the tools required and showing how to strip clean and service the various components.